Operating instructionsRerailing Equipment84072134485 GBControl desks (model CT7)(Translation of the original operating instructions)Edition 08.2009
10 4.3 Overview45364792915478 1 Switch valves 2 Switch lever 3 Manual pressure shut-off valve 4 Pushbutton valve 5 Pressure gauge 6
11 4.4 Hydraulic circuit diagrams for standard control desksCT7 - 6/3DV:30 MPa30 MPa30 MPaSupply line from hydraulic unitReturn line to hydraulic un
12CT7 - 6/4DV:30 MPa 30 MPa 30 MPa 30 MPaSupply line from hydraulic unitReturn line to hydraulic unit
13CT7 - 6/4DVV:30 MPa 30 MPa 30 MPa 30 MPaSupply line from hydraulic unitReturn line to hydraulic unit
14 4.5 Optional accessories 4.5.1 PedestalThe pedestal is intended to provide safe support for the control unit and to enable the op
15WARNING / DANGER / CAUTION! Before connecting equipment, make sure that all the components used are suitable for the maximum operating pressure of t
16DANGER / CAUTION!Make sure that nobody is present in the danger zone.Operation6. 6.1 Setting up the control deskControl desks must be set up at a
173. Move the lever on the manual pressure shut-off valve into the working position (turn anti-clockwise to the stop).2. Then start the hydraulic un
18 6.3.2 Controlling double-acting hydraulic devicesDouble-acting hydraulic devices are controlled by control levers.Throwing the control lever away
19Maintenance and service8. A visual inspection must be carried out after each use and at least once a year regardless of use. In addition, a function
20 9.2 Preventive service9.2.1 Care regulationsThe exterior of the equipment is to be cleaned from time to time in order to protect it from external
21 9.3 Repairs9.3.1 Coupling replacementThe couplings must be replaced in the event of:- external damage- the locking device not working- hydrau
22Troubleshooting10. Trouble Check Cause SolutionConnected implements move slowly or jerk in response to control commandHose lines connected correctly
23If it is not possible to rectify the malfunctions, inform an authorised LUKAS dealer or the LUKAS Customer Service department immediately.The
24As all values are subject to tolerances, there may be minor differences between the data achieved by your equipment and the data specied in the fol
25 11.3 Control desk (control unit + pedestal)DesignationCT7-6/3DV CT7-6/4DV CT7-6/4DVV(with pedestal) (with pedestal) (with pedestal)Ref. no. 840721
26EC Declaration of Conformity12.
27Notes13.
Made in GERMANY© Copyright 2010 LUKAS Hydraulik GmbHCT7_BA_GB_84072134485_0809.inddPlease dispose all packaging materials and dismantled parts properl
3 Content Page 1. Hazard classes 4 2. Product safety 5 3. Proper use 8 4. Functions and performance 9 4.1 Description 9 4.2 Hydraul
4 Wear helmet with face protection Wear safety gloves Wear safety shoes Proper recycling Observe principles of environmental protection Read a
5Product safety2. LUKAS products are developed and manufactured in order to guarantee the best performance and quality when used properly.Operator saf
6In the event of malfunctions, immediately shut down the equipment and secure it. The malfunction is to be repaired immediately.Do not carry out any c
7The generally applicable, legal and other binding national and international regulations pertaining to the prevention of accidents and prot
8Proper use3. LUKAS control desks have been developed specically for rerailing operations. They are intended to control the hydraulic j
9Functions and performance4. 4.1 DescriptionThe control desks in the CT7 model series comprise a number of valves housed in a control block. The va
Commentaires sur ces manuels